To double or triple your sales, I believe we can help you achieve this if you use our LED Linear Module or LED Light Engine instead of Osram's or Phillip's.
The LUXEON 3014 LED provides a typical flux of 28 lumens when driven at 60mA (3000K 80CRI) and delivers an efficacy of 158 lm/W. Offered in 80CRI, 90CRI and now 95CRI, these LEDs are hot color targeted at a temperature of 65°C to ensure outstanding color accuracy in the application. The LUXEON 3014 fits in a standard 3.0mm x 1.4mm socket, enabling compatibility with existing compact designs. The LED is available in a wide range of color temperatures and color rendering index (CRI) specifications.
LED retrofit kits are available from 35 watts to 200 watts which mean we can replace from a 100 watt to a 750 watt metal halide lamp. Our LED retrofit kits are ETL approved as well as DLC premium listed, providing you with a top of the line product that saves you money. Each LED retrofit kit is easily installed into any fixture you have providing you big labor saving cost. We can replace metal halide lamps in wall packs, flood lights, high bays, low bays, canopy lighting, parking lot lighting as well as all types of street lighting.
This is a SMD LED specially customized for photography, with an ultra-high color rendering index. Gold wire copper bracket can ensure good heat dissipation effect, 15*30mil large chip.
The special higher forwarder voltage will help designing some special LED project on the power input. It will reduce the current to control the total power.
This is a unique ring– it has a florid body with 24 controllable LEDs. Maybe it will drive the inspiration out of you to make a glowing magic ring! There is a 1*1 square hollow-out in the middle of this module, where you can place a Grove Encoder in and make it a rotary visual encoder
Copper based PCB is the most expensive in metal core PCB, which has a great thermal conductivity better than aluminum PCB and iron based PCB, applying to high frequency circuit design, and the areas where have a great change for high and low temperatures, as well as sophisticated communication equipment and architectural decoration industry.
LED Module BenefitsSupplies adequate light with up to 90 CRI optionsExtended life with a low operating temperaturePCB metal coreProvides even, consistent, lightingProduct FeaturesUL recognized componentsLM80 Tested LED’s & 3 step MacAdam color binningLow-profile WAGO push connectorsHighly reflective white solder maskCRI: >80Module efficacy: 185 lm/WBeam angle: 120°
MATERIAL - High Brightness Chip on Board with Copper Frame.INSTALLATION - There're two soldering lugs, replace directly, no wiring needed.APPLICATION - Being widely used in electric compoments, experiments and other DIY activities.
High efficacy LED modulesCCT: 2700K, 3000K, 3500K, 4000K, 5000K, 6500KCRI > 80 High lumen options for :-High/low bay applications-Industrial applicationsPoke in connectorsService life: 60000 hours
